Filter
Top Products
2-84
G-1. PATTERN SET – PATT NO.
Up to 8 programmable user-defined patterns set by the five keys on the
Webviewer GUI are available.
G-2. PATTERN SET – PATT TITLE
To set PATTERN TITLE, select up to 16 characters using Five keys to
the left or right.
Press ZOOM TELE button moves to the next character from the left to
the right direction and ZOOM WIDE button moves to the next character
from the right to left direction (Space displays when appears) Pattern
title is not displayed on the monitor, but only for the reference of user.
G-3. PATTERN SET – DATA FILL
To fill the programming data, press FOCUS FAR button in order to start
the data fill up. Filling data is programmed according to the the five keys on
the Webviewer GUI movement. Press FOCUS FAR button again in order
to escape.
G-4. PATTERN SET – SAVE
To saving the filling data, move five keys to the right direction when the
cursor is on SAVE. Then the cursor moves to the PATT NO.02 in order to
prepare next pattern no.
G-5. PATTERN SET – EXIT
To escape this page, move five keys to the right direction