Filter
Top Products
- 6 -
Mode Selection
Every time the Mode/Power button (#5) is pressed, the corresponding mode appears in the LCD display
(#2), in the following sequence:
*Note:
Power Off, Flash On/Off and Flash Auto Modes are disabled when using the USB cable.
Taking Images
Normal Shot Mode
The camera will be in Normal Shot Mode when first turned ON. It will also return to Normal Shot Mode
after inactivity for 5 seconds.
Frame your subject using the viewfinder (#6).
Press the Shutter button (#3) to take a picture. The buzzer (#1) will beep and Shutter Indicator (#9) will
blink. One beep sound indicates that the image was taken successfully and the 3-Digit Icon (#2k) will
count up by one.
Note:
Two beep sounds indicates the camera was unable to take a picture and the Shutter Indicator (#9) will
not blink. There may be insufficient light to take the image or the camera memory is full.
When the camera memory is full, the 3-Digit Icon (#2k) will display and flash for 3 seconds.
Self-Timer Shot Mode
In Normal Shot Mode, press Mode/Power button (#5) 3 times to choose Self-Timer Shot Mode. The LCD
display (#2) will show (#2g). The self-timer will delay for 10 seconds.
Frame your subject using the viewfinder (#6).
Press Shutter button (#3) to take a picture. The buzzer (#1) and Shutter Indicator (#9) will beep and flash
repeatedly for 10 seconds during the count down. A long-beep tone after the last beep indicates the
image was taken successfully.
Continuous Shot Mode
In Normal Shot Mode, press Mode/Power button (#5) 5 times to choose Continuous Shot Mode. The
LCD display (#2) will show (#2e). The camera will take 3 consecutive pictures at a time when the
Shutter button (#3) is pressed.
Frame your subject using the viewfinder (#6).
Press the Shutter button (#3) to take a picture. The buzzer (#1) and Shutter Indicator (#9) will beep and
blink repeatedly 3 times. Each time indicates a successful picture has been taken.
Taking Videos
AVI Video Mode
In Normal Shot Mode, press Mode/Power button (#5) 4 times to choose AVI Video Mode. LCD display
(#2) will show
(#2h).
Frame your subject using the viewfinder (#6).
Press and hold the Shutter button (#3) to capture videos. The buzzer (#1) will continuously sound until
the shutter button (#3) is released, or the camera memory is full. In both cases the camera will stop
capturing video. The 3-Digit Icon (#2k) will count up by one when complete.
Normal Shot
Self-Timer Shot
Continuous Shot
Power Off*
AVI Video
Delete Single Image
Delete All Images
Image Resolution
Image Compression
Power Frequency
Flash On/Off*
Flash Auto*
Mode/Power