Filter
Top Products
PI1000
8
SVAT ELECTRONICS
now you can see
3. SD card Status:
:Malfunction :SD card testing.
:Functioning normally.
:Continuous record.
6.3. RECORD MODE
6.3. RECORD MODE
1. THREE RECORDING MODES:
A) Manual Record: For anytime recording. Press the button to enter manual
recording status (start recording). For more information, please refer to (7.4 Record
Setup).
B) Scheduled Motion Detection Record: Set a time period to record only when
movement is detected. Motion detection triggers scheduled recording, but it will only start
recording when the movement exceeds the MD Threshold (when the movement is
greater than the preset allowable sensitivity level. For example, if you are recording in a
room with an open window
, the movement of your curtains may trigger motion detect
recording. If this occurs, you can set the MD Threshold to only record when the
movement is greater than that of the curtains. (See 7.3 Motion Detection Setup). For
more information on Record Settings, please refer to (7.3 Motion Detection setup) and
(7.4 Record Setup).
C) Scheduled Continuous Record: Schedule a start and stop time, and the DVR will
record continuously. Suitable on few constant frame recording or on long-term
continuous recording. For more information, please refer to (7.4 Record Setup).
2. STOP RECORD:
Pressing the button will stop manual recording only. Pressing will stop all
recording, regardless of the mode. To continue recording, please follow the methods
below to restart recording.
Manual Record: Re-press button.
Schedule Record: Every time your exiting the menu or playback mode, system will
check your recording schedule and auto resume recording if applicable.
Motion Detection Record:Every time your exiting the menu or playback mode, system
will check your recording schedule and auto resume recording if applicable.