Filter
Top Products
16
TANDBERG Videoconferencing SystemInstallation
LAN configuration
• Press MENU on the remote control. Select the menu ‘Terminal Settings’, then ‘LAN Settings’.
Specify the necessary LAN settings according to the instructions from your LAN administrator. If there is an
H.323 Gatekeeper present on your LAN, see also ‘H.323 Settings’.
For details, follow the instructions in chapter ‘LAN Settings’ in this manual.
ISDN configuration
For each installation of the system it is necessary to configure the unit. All configuration parameters are available
via the menu system.
• Press MENU on the remote control. Select the menu ‘Terminal Settings’, then ‘Network’.
Specify the settings for the network.
For details, follow the instructions in chapter ‘Terminal Settings’, ‘Network Configuration’ in this manual.
For further information refer to the examples in:
Appendix 1: Connecting the system to ISDN using NT1 network adapters
Appendix 2: Connecting the system to the Switched 56 network