TANDBERG 880 Digital Camera User Manual


 
22
TANDBERG Videoconferencing SystemGetting started
Selecting / setting default network
To select a specific network, press the ‘Net’ Quick Key when you are in the dial menu.:
1 Highlight the network to be used in your call.
2 Press ‘Select’ to select network or press ‘Set as Default’ to set the selected network as your preferred
choice for this and all subsequent calls.
If ‘Auto’ is selected, the system will select a network based upon the following criteria:
• If an IP-address (e.g. 123*3*0*12 ) is entered, ‘LAN’ (H.323) is selected.
• If the first digits in the number match those set in ‘H.323 Prefix’ under ‘H.323 Settings’, ‘LAN’ is selected.
• In other cases, ‘ISDN’ (H.320) is selected.
If you want to assign a specific prefix to the network selection or if you want to define your own network
configuration, see ‘Network Profiles’ in ‘Call Settings’, ‘Terminal Settings’.