TANDBERG 990 Digital Camera User Manual


 
TANDBERG Videoconferencing System
81
Advanced use
NOTE
SNMP Trap Host
SNMP (Simple Network Management Protocol) is used for monitoring and configuring different units in a network.
The codec’s SNMP Agent responds to requests from SNMP Managers (a PC program etc.). SNMP traps are
generated by the agent to inform the manager about important events.
SNMP Trap Host identifies the IP-address of the SNMP manager.
Traps can be sent to multiple SNMP Trap Hosts. Enter the IP address of up to three SNMP managers. All traps
will then be sent to the hosts listed.
SNMP Community
SNMP Community names are used to authenticate SNMP requests. SNMP requests must have a ‘password’ in
order to receive a response from the SNMP agent in the codec.
THE SNMP COMMUNITY NAME IS CASE SENSITIVE.
SNMP Settings