Filter
Top Products
DSP_ifft16x16_imre
4-32
Complex Inverse Mixed Radix 16 x 16-bit FFT With Im/Re Order
DSP_ifft16x16_imre
Function void DSP_ifft16x16_imre(const short * restrict w, int nx, short * restrict x, short
* restrict y)
Arguments w[2*nx] Pointer to complex Q.15 FFT coefficients.
nx Length of FFT in complex samples. Must be power of 2 or 4,
and 16 ≤ nx ≤ 32768.
x[2*nx] Pointer to complex data input.
y[2*nx] Pointer to complex data output.
Description This routine computes a complex inverse mixed radix IFFT with rounding and
digit reversal. Input data x[ ], output data y[ ], and coefficients w[ ] are 16-bit.
The output is returned in the separate array y[ ] in normal order. Each complex
value is stored with interleaved imaginary and real parts. The code uses a
special ordering of IFFT coefficients (also called twiddle factors) and memory
accesses to improve performance in the presence of cache.
The fft16x16_imre can be used to perform IFFT, by first conjugating the input,
performing the FFT, and conjugating again. This allows fft16x16_imre to
perform the IFFT as well. However, if the double conjugation needs to be
avoided, then this routine uses the same twiddle factors as the FFT and
performs an IFFT. The change in the sign of the twiddle factors is adjusted for
in the routine. Hence, this routine uses the same twiddle factors as the
fft16x16_imre routine.
Algorithm The C equivalent of the assembly code without restrictions is similar to the one
of the ifft16x16 routine. For further details, see the source code of the C version
of this function which is provided with this library.
Special Requirements
- In-place computation is not allowed.
- The size of the FFT, nx, must be a power of 4 or 2 and greater than or equal
to 16 and less than 32768.
- The arrays for the complex input data x[ ], complex output data y[ ], and
twiddle factors w[ ] must be double-word aligned.
- The input and output data are complex, with the imaginary/real
components stored in adjacent locations in the array. The imaginary
components are stored at even array indices, and the real components are
stored at odd array indices.
- Scaling by two is performed after each radix-4 stage except the last one.