Filter
Top Products
(9/16)
D4153497A
(5) Conformity cable Twist pair (Category 5e or over)
(6) Cable length To 100m (at the Unshielded Twist Pair (UTP) cable using)
(7) Recommended cable Oki Electric Cable Co., Ltd
HONDA TSUSHIN KOGYO CO., LTD
High bending resistance shielded Cat5e LAN cable
* Because above recommendation cable is high bending
resistance, maximum length of cable is 40m.
* Contact your dealer / distributor for details
of recommended cable.
[Machine externals specification]
(1) Dimensions 44mm(W) x 29mm(H) x 70mm(D) (Not including protrusion)
(2) Mass Approximately 120g
(3) Lens mount C-mount
(4) Flange back it is not possible to adjust it: 17.526mm
(5) Camera body grounding: insulation status
Conductive between circuit GND and camera body.
[Operating ambient conditions]
(1) Ambient conditions
- Performance assurance Temperature: 0 to +40°C, Humidity: 10 to 90% (no condensation)
- Operating assurance Temperature: -5 to +45°C, Humidity: 90% or less (no condensation)
- Storage assurance Temperature: -20 to +60°C, Humidity: 90% or less (no condensation)
(2) EMC conditions (Electro-Magnetic Compatibility)
- EMI (Electro-Magnetic interference)
EN61000-6-4 conformity
FCC part15 Subpart B class A conformity
- EMS(Electro-Magnetic susceptibility)
EN61000-6-2 conformity
Notes on Conformity of the EMC:
About the conformity of the EMC standard of this machine, it has guaranteed in the conditions
combined with the option part of 4th clause.
When used combining parts other than specification of our company, I ask you to have final
EMC conformity checked of a visitor with a machine and the whole equipment.