Filter
Top Products
- 10 -
4. CONNECTION
DC 12 V power supply
DC IN 12V terminal
VIDEO terminal
• When installing the camera, unplug the power source of the camera and all connected
equipment.
• Please use a monitor which has BNC or S-Video input.
•A coaxial cable of 75Ω or S-Video cable is needed to connect a video monitor etc.
•For DC power supply connecting to DC 12 V terminal, use a power supply with the
specifications described below.
Power supply voltage: DC12V ±10%
Current rating: 2.0 A or more
Ripple voltage: 50 mV (p-p) or less
Connector: HR10A—7P—4S by HIROSE Electronics Co., Ltd.
Pins 1, 2: +12V
Pins 3, 4: GND
(1) Install the lens to the camera body. For available lenses, refer to the item “5 LENS
ADJUSTMENT.”
(2) Connect a coaxial cable from the VIDEO terminal to the video input terminal of the
video monitor etc.
(3) Connect equipment, turn on the power supply to the camera, and then turn on the
power to the equipment.
(4) Adjust the lens by referring to item 5, obtain the best camera performance.
Cautions