Filter
Top Products
- 25 -
7.4 WHT BAL (White Balance)
WHT BAL has three modes: ONE PUSH WB, ATW and MANUAL.
Place the cursor “->” on MODE, press the [DATA UP] or [DATA DOWN] button, and select the
desired mode from ONE PUSH WB, ATW, MANUAL.
7.4.1 When Changing Setting of ONE PUSH WB (One Push White Balance) Mode
Up/down movement
by MENU UP/DOWN
Set by DATA
UP/DOWN
-- 2 WHT BAL -- <FILE A>
MODE ONE PUSH WB
R PAINT 0
B PAINT 0
AREA PRESET A
Display of SCENE file
WHT BAL mode ONE PUSH WB, ATW, MANUAL
R RAINT (offset) adjustment
-10 10
B RAINT (offset) adjustment
-10 10
Electronic multiplication gain
PRESET A, PRESET B,
PRESET C, PRESET D,
PRESET E, PRESET F,
PRESET G,
(1) Changing R PAINT (red offset)
q Using the [MENU UP] or [MENU DOWN] button, place “→” on R PAINT.
w Use the [DATA UP] or [DATA DOWN] button to make setting.
[DATA UP]
–10 0 10
[DATA DOWN]
Increase in red
Decrease in red
(2) Changing R PAINT (blue offset)
q Using the [MENU UP] or [MENU DOWN] button, place “→” on B PAINT.
w Use the [DATA UP] or [DATA DOWN] button to make setting.
[DATA UP]
–10 0 10
[DATA DOWN]
Increase in blue
Decrease in blue