Filter
Top Products
- 6 -
Carefully handle the units.
Do not drop, or give a strong shock or vibration to the camera. This may cause problems. Treat the camera
cables carefully to prevent cable problems, such as cable breakdown and loosened connections.
Do not shoot intense light.
If there is an intense light at a location on the screen such as a spot light, a blooming and smearing may occur.
When intense light enters, vertical stripes may appear on the screen. This is not a malfunction. Ghosts may occur
when there is an intense light near the object. In this case, change the shooting angle.
Install the camera in a location free from noise.
If the camera or the cables are located near power utility lines or a TV, etc. undesirable noise may appear on
the screen. In such a case, try to change the location of the camera or the cable wiring.
Moire
When thin stripe patterns are shot, stripe patterns that are not actually there (moire) may appears as
interference stripes. This is not a malfunction.
Operating ambient temperature and humidity.
Do not use the camera in places where temperature and humidity exceed the specifications. Picture quality
will lower and internal parts may be damaged.
Be particularly careful when using in places exposed to direct sunlight. When shooting in hot places,
depending on the conditions of the object and the camera (for example when the gain is increased), noise in
the form of vertical strips or white dots may occur. This is not a malfunction.
Handling of the protection cap.
Keep the protection cap away from children. Children may put them into mouth or swallow them accidentally. The
protection cap protects the image sensing plane when the lens is removed from the camera, do not throw away.
When not using the camera for a longtime.
Stop supplying power.
When cleaning the camera
Always turn off the power and clean with a piece of soft dry cloth. Do not use benzine, alcohol, thinner,
household detergents, chemically treated cloths, etc. If used, coating and printed letters may be discolored.
When cleaning the lens, use a lens cleaning paper, etc.
Avoid using or storing the camera in the following places:
Places filled with highly flammable gas.
Places near gasoline, benzene, or paint thinner.
Places subject to strong vibration.
Places contacting chemicals (such as pesticides), rubber or vinyl products for a long period of time.
1Camera Control Unit............................................................................................... 1
2Accessories
aInstruction manual........................................................................................ 1
2COMPONENTS
1CAUTIONS ON USE AND INSTALLATION