Filter
Top Products
- 9 -
When connecting the camera cables, be sure to turn off the camera and the other equipment
connected.
We suggest using a C mount lens made for a 3CCD camera.
When using another lens, the best camera performance of this camera may not be obtained.
(For example, low resolution may occur, focus may be lost through the range of a zoom lens, and
flare, ghost or shading may occur)
Furthermore, in order to avoid damaging the mounting portion of the camera head, use a lens
which has projection dimension from the mounting base of less than 0.157”(4mm).
For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA
approved ungrounding type AC adaptor with the specifications described below.
Power supply voltage
DC12V10%
Current rating
More than 830mA, Less than2.5A
Ripple voltage
Less than 50mVpp
Connector
HR10A7P4S by HIROSE electronics Co. Ltd
Pins 1, 2 12V
Pins 3, 4 GND
DC IN 12V RGB
1 +12V 1 R
2 +12V 2 G
3 GND 3 B
4 GND 4 TXD
5 GND
6 GND
7 GND
8 SYNC
9 12V
10 GND
11 RXD
12 TRIG
13 HD IN/OUT
14 VD IN/OUT
15 INDEX
5'
''
'CONNECTION
5'
''
'1 Standard Connection
5'
''
'2 Cautions on Connection
5'
''
'3 Connector Pin Assignments