Filter
Top Products
- 8 -
Prism faceplate
RGB terminal
DISP button
PAGE button
MENU UP button
MENU DOWN button
DATA UP(AWB) button
DATA DOWN button
DC IN 12V terminal
Front Rear
Prism faceplate
The protection cap is attached on the lens mount portion. After removing the
cap, mount the lens. Be careful not to scratch or touch the optical area.
DISP button
Used when switching the display.
PAGE button
Used when switching to the menu and when selecting the menus.
MENU UP button
Select the function to be confirmed or changed on the menu.
MENU DOWN button
Select the function to be confirmed or changed on the menu.
DATA UP (AWB) button
Changes the value of the function selected by the MENU (UP/DOWN) button.
(Also used when using AWB.)
DATA DOWN button
Changes the value of the function selected by the MENU (UP/DOWN) button.
DC IN 12V terminal
Accept a DC power input (12V).
RGB terminal
Used as the connector terminal for RGB output, and SYNC output.
HD and VD signals are input/output. When the random trigger operation is
used, the trigger signal is input and the index signal is output. This terminal
also includes an RS232C format control.
4NAMES AND FUNCTIONS