Filter
Top Products
28
( 4 ) PW SR (Pulse width trigger SYNC-RESET)
The trigger input to the CC1 of the DIGITAL terminal develops 1 frame images.
(4. 1) 1 Pulse Width Trigger SYNC-RESET Picture Output Timing
*1: Externally input signal
*2: Exposure time = Trigger pulse width + 6 µs
(Valid trigger pulse width is 2 µs or greater for external trigger shutter operation.)
*3: VD is generated after 0 to 1H following the completion of the exposure period and the video is synchro-
nized to this and output.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig-
ger, there will be an effect on the video.
About 1 µs
About 7 µs
Exposure completion
0 to 1H
Tr igger*
1
Negative polarity mode
Positive polarity mode
Exposure period*
2
(Internal VD)
*
3
RGB data
(video interval image)
FVAL
LVAL,
DVAL
20H (
Partial scanning OFF
)
14H (
Partial scanning
90fps)
18H (
Partial scanning
115fps)
18H (
Partial scanning
120fps)
22H (
Partial scanning
160fps)
23H (
Partial scanning 1
80fps)
26H (
Partial scanning
240fps)