Filter
Top Products
8
5. OPERATION
A camera head “IK-TF5H” is supposed to be connected to this camera control unit from this section.
1
Refer to the item " 4. CONNECTION", connect each equipment correctly.
2
Turn on the connected equipment and the power source of the camera.
3
When using the camera for the first time and when replacing the camera cable and the camera head, be
sure to operate the ABB adjustment refer to the item "Automatic Black Barance".
4
Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc..
5
Refer to the item "5.1 White Balance", make the adjustment.
6
Refer to the items "7. MODE SETTING BY ON SCREEN DISPLAY", select the necessary items.
5. 1Automatic Black Balance
Black balance adjustment is necessary to get the correct black picture level.
• Close the lens iris and put the lens cover on.
• If the index menu/menu is displayed, press the [DISP] button to disable or the character display.
• Hold the [DATA DOWN] button for approx. 1 second.
• When the black balance adjustment operation starts, the character ABB blinks on the screen.
• When the black balance adjustment operation finishes, the character ABB stops blinking and the result
appears for approx. 1 second.
• When the black balance adjustment performed, set the electronic shutter, Synchro. Scan, partial read to
OFF, and do not operate trigger mode or external sync.
• When using the camera for the first time and when replacing the camera cable and the camera head, be
sure to operate the ABB adjustment refer to the item "Automatic Black Barance".
AWB
(Automatic White Balance)
Adjust white balance by displaying the
white object inside the area set by AWB
menu and pressing the [DATA UP] button.
When the shutter mode is E.TRG, AWB is
not available.
MANU
(Manual White Balance)
Adjust the white balance manually using
the WHT BAL menu while shooting the
white object.
Adjustment is performed by confirming
with a monitor etc.
Outline
Note
5. 2 White Balance
For the white balance adjustment of this unit, AWB (Automatic White Balance) and MANU (Manual white
balance) adjustments are provided. To select the desired mode, refer to the items "7.2 (3) WHT BAL (White
balance)" and "7. MODE SETTING BY ON SCREEN DISPLAY".
Meaning
Automatic black balance adjustment finished correctly.
Automatic black balance adjustment cannot be performed because the
lens iris is open. Close the lens iris.
Automatic black balance adjustment cannot be performed.
Operate the automatic black balance again.
Display
ABB OK
ABB NG
CLOSE LENS
ABB NG