6
3. NAMES AND FUNCTIONS
1
Camera cable for ‘IK-TF5H’ terminal Where the camera cable for ‘IK-TF5H’ is connected.
2
DISP button To change the display mode.
3
PAGE button To switch and select menus.
4
MENU UP button To select the function to be confirmed or changed on the menu.
5
MENU DOWN button To select the function to be confirmed or changed on the menu.
6
DATA UP (AWB) button To change the value of the function selected by the MENU (UP/DOWN)
button. (Also used when using AWB.)
7
DATA DOWN (ABB) button To change the value of the function selected by the MENU (UP/DOWN)
button. (Also used when using ABB)
8
DC IN 12V terminal Accept a DC power input (12V).
9
DIGITAL terminal 8-bit RGB, digital signal, and sync signal are output in the Camera
Link format.
Trigger signal is input.
Mode switching signal for partial scanning is input.
Accepts serial communication control signal.
!
Mounting holes M3 Used to fix the camera.
"
Mounting holes M2 Used to fix the camera.
DISP
PAGE
DC IN 12V
MENU
DATA
(AWB)
1
8
2
4
6
7
5
9
3
Camera cable for
‘IK-TF5H’ terminal
DIGITAL terminal
DISP button
PAGE button
[ Rear ][ Front ]
MENU UP button
MENU DOWN button
DATA UP (AWB) button
DATA DOWN button
DC IN 12V terminal
10 11
[ Bottom ]