Toshiba IK-WR12A Security Camera User Manual


 
14
Physical Description
N.C.
N.C.
N.C.
AC24V
AC24V
Inner View
Focus Controller
Zoom Controller
Ethernet 10/100 RJ45 Plug
Audio Out (green)
Microphone In (pink)
Power Cord Socket (black)
General I/O Terminal Block
Ground
SD/SDHC Card
Slot
IR LEDs
Recessed Reset
Button
Status LED
Light Sensor
Pan Adjustment Screw
Rotation Adjustment Screw
Vari-focal Lens
(f= 3~9 mm)
Tilt Adjustment Screw
Fan
Heater
Operating environment: –30 °C ~ +50 °C
{–22 °F ~ 122 °F} *1
When the temparature inside the Network
Camera reaches over 50°C, the fan will
operate automatically; when the temparature
inside the Network Camera drops to 0°C, the
heater and fan will both operate automatically.
*1 When the camera is installed and operated in
low temperatures below –10 °C {14 °F}, normal
images may not be obtained immediately after
startup. In such a case, wait until the camera
warms up (taking more than 1 hour) and start
adjustment after turning on the power again.