Filter
Top Products
- 67 -
Getting
Ready
Taking
Photographs
Playing
Back Images
Other
Applications
Additional
Information
Erasing
Images
Handy
Functions
Photography in the Full Manual Mode
Set the aperture and shutter speed values separately before taking a photograph.
Carry out steps 1 to 2 in “Manual Settings” (page 58).
Press or to select [ EXP. ].
Press to display option menu, press or to
select [ M ] and press ENTER.
Pressing ENTER selects the setting.
Press ENTER.
The camera is ready to take photographs.
Pressing or to set the aperture value (➲ Page 64), and pressing or to
set the shutter speed value (➲ Page 66) separately are also possible.
Compose the picture, press the shutter button down halfway, and press it down
fully. ➲ Page 40
The camera takes the picture.
Memo
• When pressing or in the full manual mode, the shutter speed is adjusted, but the exposure
compensation setting is not possible. However the exposure value is displayed on the LCD monitor.
When the exposure value is displayed in red, it shows over- or under-exposure.
It is recommended that the shutter speed and the aperture value be adjusted to obtain the proper
level of exposure.
• If the aperture value is set to F2.9 (increased aperture size), the shutter speed 1/1000 second is not
available.