Filter
Top Products
18
Use the following IP address: Select this option when the fixed IP address is set as the IP
address.
IP address: Enter the IP address of the device.
Subnet mask: Enter the subnet mask.
Default gateway: Enter the default gateway.
Use the following DNS server address: Select this option when you set the fixed address as
the IP address of DNS server.
Preferred DNS server: Enter the IP address of the Preferred DNS server.
Alternate DNS Server: Enter the IP address of the Alternate DNS Server, if necessary.
HTTP Port Number: Select 80 in general situations. If you want to use a port number other
than 80, select the text box and enter a port number between 1124 and 65534.
When you have set the HTTP port number to a number other than 80 on the Network setting page
or in the Setup Program, access the device by typing the IP address of the device on the web
browser as follows: for example, when HTTP port number is set to 2000 and the IP address of
your camera is set to 192.168.1.100, you should type in http://192.168.1.100:2000
to access the
device.
5.3.2.2 PPPoE
If your ISP provides Dynamic IP with authentication by username and password, type all PPPoE
information in this part. When using the PPPoE function, you need to turn on the DDNS or IP Notification
function at same time.