TP-Link TL-SC2020 Security Camera User Manual


 
19
IP Address: The IP address obtained at the PPPoE connecting with network.
User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it up to
64 characters.
Password: Enter the password for authentication necessary for PPPoE connections. Type it
up to 32 characters.
Re-type Password: Re-type the password to confirm.
Obtain DNS server address automatically: Select this to obtain the address of DNS server
automatically.
Use the following DNS server address: Select this when you set the fixed address as the IP
address of DNS server.
Primary DNS server: Enter the IP address of the primary DNS server.
Secondary DNS server: Enter the IP address of the secondary DNS server.
Note:
1) PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating
Point-to-Point Protocol frames inside Ethernet frames. PPPoE connection is used mainly with
ADSL service where individual users connect to the ADSL transceiver (modem) over Ethernet
work. It also widely used in XDSL (digital affiliate line such as ADSL, VDSL or SDSL)