Filter
Top Products
28
Select On when you use the e-Mail (SMTP) function. The common setting options are displayed below.
Select Off, if you do not wish to use the e-Mail (SMTP) function.
SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address of the
SMTP server.
SMTP Server Port: You can set port number from 1~65535 according to your mail server. The
default value is 25.
SSL: Tick SSL box if the mail server you use has security restriction.
Note:
If you use g-mail as your mail server, you should set 25 as your port number and tick SSL box.
Authentication: Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: If authentication is necessary when an e-mail is sent, select one of the authentication
methods from the followings.
SMTP: Select if SMTP authentication is necessary for sending e-mail.
POP Before SMTP: Select when POP before SMTP authentication is necessary for sending e-mail.
Note:
When you set to On, be sure to select either or both SMTP or / and POP before SMTP.
POP server name: It is necessary when the POP before SMTP is selected in Authentication.
Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the
POP server. This setting is necessary when the SMTP server which sends e-mails performs
authentication using the POP user account.
User name, Password: Type the user name and Password of the user who has the mail
account. This setting is necessary when the SMTP server which sends e-mails performs
authentication.