Filter
Top Products
35
6.3.6 IP Notification
Once IP Notification is set to "On", the camera will automatically send an e-mail notification to
tell users its updated network parameters if the network settings about IP address、network
connection type 、HTTP port or wireless connection is changed or completed. (Some settings
will take effect after rebooting.)
¾ Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. When the
network settings related to the chosen notify type are changed, an e-mail notification will be
sent to inform you of the updated network information of the camera.
¾ SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address of
the SMTP server.
¾ SMTP Server Port: You can set port number from 1~65535 according to your mail server.
The default value is 25.
z SSL: It is Security setting. Checking SSL box if the mail server you use has security
restriction.
)
Note:
If you use g-mail as your mail server, you should set 587 as your port number and check SSL box.
¾ Authentication: Select the authentication required when you send an email.
z Off: Select this if no authentication is necessary when an email is sent.
z On: If authentication is necessary when an e-mail is sent, there are SMPT, POP before
SMPT or both three options.
z SMTP: Select this if SMTP authentication is necessary when an e-mail is sent.