Filter
Top Products
36
z POP before SMTP: Select this if POP before SMTP authentication is necessary when an
e-mail is sent. If this option is selected, the IP Notification page will be different as
following figure shown.
z POP server name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or type the
IP address of the POP server. This setting is necessary when the SMTP server which
sends e-mails performs authentication using the POP user account.
z User name, Password: Type the username and password of the user who has the mail
account. This setting is necessary when the SMTP server which sends e-mails performs
authentication.
¾ Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
¾ Administrator e-mail address: Type the Administrator e-Mail address up to 64 characters.
This address is used for reply mail and sending system messages from the SMTP server.
¾ Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is
sent according to the IP notification.
¾ Message: Type the text of the E-mail up to 384 characters. Default value provides network
information including IP, Port, MAC, Model, Firmware Version and Web Version.
6.3.7 Wireless
Choose Network → Wireless, you can configure the wireless function for the camera in the figure
below.