30
6.3.2 PPPoE (Point-to-Point Protocol over Ethernet)
If your ISP provides Dynamic IP with authentication by username and password, enter all PPPoE
information in this part. When you use the PPPoE function, you need to turn on the DDNS or IP
Notification function at the same time.
¾ IP address: The IP address obtained when the IP camera connecting with network at PPPoE.
¾ User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64
characters.
¾ Password: Enter the password for authentication necessary for PPPoE connections. Type it up to
32 characters.
¾ Re-type password: Re-type the password to confirm.
¾ Obtain DNS server address automatically: Select this to obtain the address of DNS server
automatically.