Filter
Top Products
74
7.7.1 Setting
Alarm buffer: The basic setting options are displayed below.
¾ Recording capacity
z Pre-alarm period: Display the maximum recording capacity of image/audio before the alarm
detection.
z Post-alarm period: Display the maximum recording capacity of image/audio after the alarm
detection.
¾ Recording time: Set the recording time for the Pre-alarm image/audio and Post alarm image/audio.
z Pre alarm period: Type it with recording time of the image/audio before the alarm detection.
z Post alarm period: Type it with recording time of the image/audio after the alarm detection.
)
Note:
The value of Recording capacity differs depending on Image size, Bitrate (for MPEG4) and Image
quality (for MPEG4 and MJPEG) in the camera setting menu.
7.8 Motion detection