Filter
Top Products
13
Proper removal of your Photo Frame (from Mac OS):
First drag-and-drop the Disk icon corresponding to your Photo Frame into the trashcan then unplug your
Photo Frame from the USB port.
Linux® Kernel 2.4 or later
No drivers are required. Plug your Photo Frame into a USB port and mount it.
1. First create a directory for the Photo Frame.
Example: mkdir /mnt / Photo Frame
2. Then, mount the Photo Frame.
Example: mount –a –t msdos /dev/sda1 /mnt / Photo Frame
Proper removal of your Photo Frame (from Linux):
Execute umount /mnt/ Photo Frame to un-mount the device. Then unplug your Photo Frame from the USB
port.
1. WARNING! To prevent data loss, always follow the proper removal procedures when
disconnecting the Photo Frame from your computer
2. When Photo Frame is connected to a computer, it can only be used for transferring
files. You will not
be able to use any of the Photo Frame’s audio or video at this time. Please disconnect
your Photo Frame from the computer to resume normal viewing or listening.
3. The USB flash drive port will not function while the Photo Frame is connected to your
computer via the Mini-USB port.
4. NEVER format your Photo Frame.