Filter
Top Products
- 39 -
The IP Filter setting allows the administrator to limit the users
within a certain range of IP addresses to have access to the
camera.
To disable this feature, select the Disable option; otherwise,
select the Accept option to assign the range of IP addresses
that are allowed to access the camera, or select the Deny
option to assign the range of IP addresses that are blocked to
access the camera.
z Accept
- Start/End IP Address: Assign a range of IP
addresses that are allowed to access the camera by
entering the Start IP address and End IP address
options. When you are finished, click Add to save the
range setting. You can repeat the action to assign
multiple ranges for the camera.