Filter
Top Products
- Scan: When multiple cameras connected, click this
button to display the video views between cameras.
Click the Scan button again to stop scanning.
- PREV: When multiple cameras connected, click this
button to switch the video view to the previous camera.
- NEXT: When multiple cameras connected, click this
button to switch the video view to the next camera.
TIP To set the time interval of scanning, click SETTING >
Other and then adjust the time from 1 to 10 seconds in
the Time interval of scan option.
CAMERA Panel
- TRIGGER OUT: Click to turn on the trigger out
connector of the camera. This button is available only
when the connected camera supports the trigger out
connector, which is used to control the external device
connected to the camera, such as a light.
- SNAPSHOT: Click to capture a still image using the
selected camera and save the file in the computer.
- 70 -