Filter
Top Products
English 16
INSTALL THE BATTERY PACK AND CARD
1 Insert the battery pack and card.
h The card can be used after it has been formatted with the camera
(page 91).
h Make sure that the battery pack and card orientation are correct.
h When inserting the battery pack, be careful of the latch that secures it.
1
2
4
3
Open battery/card compartment cover on the side of the camera.
Insert the battery pack. Insert all the way until it clicks.
3Pull out
2 Push down,
then pull out
1 Open
[o] mark
Contact end
2 Press the latch down
tor release the lock
<Battery pack>
Close the battery/card compartment cover.
* To remove the card...
<Card>
1 Open
Uniden
logo