Filter
Top Products
17
Solving Problems
If you have any trouble with your system, try these simple steps first. If you still have a question, call
our Customer Care Line listed on the front cover.
If… Try..
The image on the display is
too bright.
Adjusting the brightness on the receiver (in the
System Setup
sub-
menu).
-
The image on the display is
too dim.
Adjusting the brightness on the receiver (in the
System Setup
sub-
menu).
Making sure the camera is at the right distance for low-light
conditions.
-
-
The image on my television
is too bright/dark.
Adjusting the brightness on your television. (The receiver brightness
setting does not affect the television.)
-
The image does not fit my
TV screen.
Changing the
TV out
setting on the receiver (in the
System Setup
sub-menu).
-
The display is completely
blank.
Making sure the AV output cable is not connected.
Making sure the receiver is plugged in.
Switching to a different camera. (If the receiver is in quad display
mode and the cameras are not working, the screen could be blank.)
Resetting the receiver.
-
-
-
-
The display just says
No
Signal
.
Switching to a different channel.
Checking the channel status icon at the top of the screen to see
which channel the receiver is on. Make sure the camera assigned to
this channel is powered on.
Re-pair the camera to the receiver.
-
-
-
The display just says
USB
PC Camera Mode
.
Disconnecting the USB cable.-
The image on the screen is
frozen.
Resetting the camera.
Resetting the receiver.
-
-