Filter
Top Products
37
Section 10
Troubleshooting
Troubleshooting
1. The ash is not working.
The battery power is low.
The camcorder is in DC power mode.
In ash auto mode, camcorder ash res ONLY when necessary (in dark setting as example).
2. The les on the memory card do not display smoothly when the LCD shows the “!” marking.
The “!” means the SD card is low speed or is having wrong content inside. The way to solve this
condition is to format SD card by the camcorder instead of a PC (Please refer to the detailed Format
instruction in Section 5).
Or please change the SD/SDHC/SDXC card to a high speed one.
3. Why do some of my indoor photos look blurry and dark?
The camcorder extends photo exposure time under low light/ indoor condition. Keep the camcorder
(and
the target subject) steady for several seconds when taking photos. The shutter will sound when
photos are being taken.
4. How do I charge battery?
You must use the supplied AC charger or the USB cable. The camcorder must be turned OFF. The
blinking light conrms the camcorder is currently charging, and the light becomes constant after the
charging is completed. In AC charging Mode, the light will turn itself off automatically after 3~5
minutes . The full charge time is about 4 to 5 hours. (Actual charging time may vary. It depends on
the battery conditions.)
5. After connecting the USB cable to the computer, ……
1. The disk [DV] indicates the internal memory of the camcorder. (The disk label may be different
according to different model and PC OS.)
2. [Removable Disk] indicates the external memory. (Under the circumstances of within the SD/
SDHC/SDXC card in the camcorder)
3. The disk [DVAP] indicates the built-in Internet Direct application is saved at this disk. Please DO
NOT format this disk or delete the application inside; otherwise, the Internet Direct application
can not function.