Filter
Top Products
Take care that the camera is not dropped, or exposed to severe mechanical shock
when it is being moved. This may cause the camera to malfunction.
If you are using the optional AC power adapter, do not move the camera while it
is switched on. Unplug the adapter from the AC power outlet after you have
switched off the camera. Then ensure that connector cords or cables are
disconnected before moving the camera. Failure to do so may damage the cords or
cables and cause a fire or electric shock.
When handling the camera, always unplug it from the AC power adapter for safety.
If you are using an AC power adapter, unplug the adapter from the AC power
outlet after you have disconnected the camera. Failure to do so could result in
an electric shock.
When leaving the camera unused for long periods always unplug the camera from
the AC power adapter for safety. If you are using an AC power adapter, unplug
the adapter from the AC power outlet after you have disconnected the camera.
Failure to do so could result in a fire.
Do not use batteries other than those specified for use with your camera.
The use of unsuitable batteries may result in the batteries splitting or leaking
and causing a fire, injury, or soiling of the battery compartment.
When fitting a battery into the camera, check the polarity markings on the
battery to ensure that you insert the batteries correctly. Incorrect battery
polarity may result in the batteries splitting or leaking and causing a fire,
injury, or soiling of the battery compartment.
Remove the batteries if the camera will not be used for an extended period of
time. The batteries may leak and cause a fire, injury, or soiling of the battery
compartment. If the batteries leak, clean and wipe the battery compartment
carefully and install new batteries. Wash your hands carefully if you touch the
battery fluid.
WARNING
Do not use this camera if it is emitting smoke, is unusually hot to the touch,
is emitting any unusual odor or noise, or is in any other abnormal state. Use of
the camera in any of these situations may cause a fire or electric shock. Stop
using the camera immediately, turn the camera off, and then disconnect the power
source (batteries or AC power adapter). (If you are using the AC power adapter,
unplug the adapter from the AC power outlet after you have disconnected the
camera.) After checking that smoke is no longer being emitted, contact your
dealer or your local authorized service facility and request repairs. Never
attempt to repair this camera yourself, as this is dangerous.
Do not use the camera if any water has entered the camera. Switch the camera
off, and then disconnect the power source (batteries or AC power adapter). (If
you are using the AC power adapter, unplug the adapter from the AC power outlet
after you have disconnected the camera.) Then contact your dealer or your local
authorized service facility. Do not continue to use the camera as this may cause
a fire or electric shock.
Do not use the camera if any foreign objects have entered the camera. Turn the
camera off, and then disconnect the power source (batteries or AC power
adapter). (If you are using the AC power adapter, unplug the adapter from the AC