Filter
Top Products
19
E
Using the landscape mode
The landscape mode, suitable for scenery shooting, is used when the distance to
the subject is between 1.9m and infinity.
1. Open the lens cover, then the mode dial to
mode, and power on the camera.
2. Move the focus switch located on the front
side of the camera to the position.
3. Compose the picture.
4. Press the shutter button.
• You can only set the digital zoom at the resolution of 2048x1536 pixels; digital zoom is not
available at the resolution of 1024x768 pixels and 640x480 pixels. When you play back a
"digitally zoomed" image, the image size is 1024x768 pixels.
• The more the image is enlarged, the more pixilated (grainier) the image.
• Digital zoom cannot be used in movie mode.
X2
0008
Using the digital zoom
By using the digital zoom, images can be enlarged so that the subject appears
closer. However, the more the image is enlarged, the grainier the image will
become. The digital zoom function is only available when you set the LCD monitor
and the digital zoom to ON. To capture a digitally zoomed image, perform the
following steps:
1. Open the lens cover, turn the mode dial to
mode, and power on the camera.
2. Turn the LCD monitor on by pressing the
button.
3. Press OK to activate 2X digital zoom function.
The 2X icon appears on the LCD monitor.
To cancel the digital zoom function, press
OK again.
4. Press the shutter button to capture a "zoomed"
image.