Filter
Top Products
VIVOTEK
146 - User's Manual
6.9. IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE DESCRIPTION
addallow Add allowed IP address range to the server. Start and end
parameters must be specified. If the index parameter is specified,
it will try to add starting from the index position.
adddeny Add denied IP address range to the server. Start and end
parameters must be specified. If the index parameter is specified,
it will try to add starting from the index position.
deleteallow Remove allowed IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address
from given index position. [start, end] parameters have higher
priority then the [index] parameter.
Method
deletedeny Remove denied IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address
from given index position. [start, end] parameters have higher
priority then the [index] parameter.
start <ip address> The starting IP address to add or to delete.
end <ip address> The ending IP address to add or to delete.
index <value> The start position to add or to delete.
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.