Filter
Top Products
VIVOTEK
136 - User's Manual
0: off
1: auto
2: always on
3: keep current value
wdrc_strength 0~2 4/4 WDR enhanced.
0: low
1: medium
2: high
agc 0,1,2 4/4 Set auto gain control to normal level or MAX level.
0->2x,
1->4x,
2->8x
(not used in FD8162)
agcmode auto,fixed 4/4 Set auto gain control mode.
maxgain 0~100 4/4 Manual set maximum gain value.
mingain 0~100 4/4 Manual set minimum gain value.
autoiris <boolean> 4/4 Enable auto Iris.
(not used in FD8162)
7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule
<product
dependent>
6/6 Set IR cut control mode
daymodebegintime 00:00~23:59 6/6 Day mode begin time
daymodeendtime 00:00~23:59 6/6 Day mod end time
bwmode <boolean> 6/6 Switch to B/W in night mode if enabled
sensitivity low,
normal,
high
6/6 Sensitivity of light sensor