Vivotek FD8162 Security Camera User Manual


 
VIVOTEK
User's Manual - 179
mpeg4_intraperiod 250, 500, 1000, 2000, 3000,
4000
Intra frame period in milliseconds.
mpeg4_ratecontrolmode cbr, vbr cbr: constant bitrate
vbr: fix quality
mpeg4_quant 0, 1~5
99, 1~5
<product dependent>
Quality of video when choosing vbr in
“mpeg4_ratecontrolmode”.
0,99 is the customized manual input setting.
1 = worst quality, 5 = best quality.
<product dependent>
mpeg4_qvalue 1~31
2~31
<product dependent>
Manual video quality level input.
(This must be present if mpeg4_quant is equal to 0, 99)
<product dependent>
<product dependent>
mpeg4_bitrate 1000~8000000
1000~4000000
<product dependent>
Set bit rate in bps when choosing cbr in
“mpeg4_ratecontrolmode”.
mpeg4_maxframe 1~25,
26~30 (only for NTSC or
60Hz CMOS)
Set maximum frame rate in fps (for MPEG-4).
h264_intraperiod 250, 500, 1000, 2000, 3000,
4000
Intra frame period in milliseconds.
h264_ratecontrolmode cbr, vbr cbr: constant bitrate
vbr: fix quality
h264_quant 0, 1~5
99, 1~5
<product dependent>
Quality of video when choosing vbr in
“h264_ratecontrolmode”.
0,99 is the customized manual input setting.
1 = worst quality, 5 = best quality.
<product dependent>
h264_qvalue 0~51
<product dependent>
Manual video quality level input.
(This must be present if h264_quant is equal to 0, 99)
<product dependent>
h264_bitrate 1000~8000000
1000~4000000
<product dependent>
Set bit rate in bps when choosing cbr in
“h264_ratecontrolmode”.
h264_maxframe 1~25,
26~30 (only for NTSC or
60Hz CMOS)
Set maximum frame rate in fps (for H264).
Technical Specications
Technical Specifications
Fixed Dome Network Camera
FD8162
Ver 1.1
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886-2-82455282|F: +886-2-82455532|E: sales@vivotek.com
VIVOTEK USA, INC.
470 Lakeside Drive Suite C, Sunnyvale, CA 94085 USA
|T: 408-773-8686|F: 408-773-8298|E: salesusa@vivotek.com
Networking
10/100 Mbps Ethernet, RJ-45
Onvif support
Protocols:
IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP,
DHCP, TP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, and 802.1X
Alarm and Event Management
Triple-window video motion detection
Tamper detection
One D/I and one D/O for external sensor and alarm
PIR (Passive Infrared Sensor) for human detection
Event notification using HTTP, SMTP or FTP
Local recording of MP4 file
On-board Storage
MicroSD/SDHC card slot
Stores snapshots and video clips
Security
Multi-level user access with password protection
IP address filtering
HTTPS encrypted data transmission
802.1X port-based authentication for network protection
Users
Live viewing for up to 10 clients
Weight
Net: 765 g
LED Indicator
System power and status indicator
Power
12V DC
24V AC
Power consumption: Max. 5.3 W
802.3af compliant Power-over-Ethernet (Class 3)
Approvals
CE, LVD, FCC, VCCI, C-Tick, UL
Operating Environments
Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Humidity: 90% RH
Viewing System Requirements
OS: Microsoft Windows 7/Vista/XP/2000
Browser: Mozilla Firefox, Internet Explorer 6.x or above
Cell phone: 3GPP player
Real Player: 10.5 or above
Quick Time: 6.5 or above
Installation, Management, and Maintenance
One-step mounting
Camera angle adjustment: pan 350°, tilt 65°, rotate 350°
Installation Wizard 2
32-CH ST7501 recording software
Supports firmware upgrade
Applications
SDK available for application development and system integration
Warranty
36 months
Dimension
Ø 157 mm x 110 mm
System
CPU: TI DM368 SoC
Flash: 16MB
RAM: 256MB
Embedded OS: Linux 2.6
Lens
Board lens, vari-focal, f = 3 ~ 9 mm, F1.2 (wide), F2.1 (tele), auto-iris
Removable IR-cut filter for day & night function
Angle of View
31.7° ~ 93.0° (horizontal)
23.8° ~ 68.4° (vertical)
39.6°~118.9° (diagonal)
Shutter Time
1/5 sec. to 1/32,000 sec
Image Sensor
1/2.7" progressive scan CMOS sensor in 1920x1080 resolution
Minimum Illumination
0.57 Lux @ F1.2 (1/30S)
0.08 Lux @ F1.2 (1/5S)
0.001 Lux @ F1.2 (B/W)
0 Lux / F1.2 (IR LED on)
IR Illuminators
Built-in IR illuminators, effective up to 15 meters
IR LED*18
Video
Compression: H.264, MJPEG & MPEG-4
Streaming:
Multiple simultaneous streams
H.264 streaming over UDP, TCP, HTTP or HTTPS
MPEG-4 streaming over UDP, TCP, HTTP or HTTPS
H.264/MPEG-4 multicast streaming
MJPEG streaming over HTTP or HTTPS
Supports activity adaptive streaming for dynamic frame rate control
Supports video cropping for bandwidth saving
Supports ePTZ for data efficiency
Supports 3GPP mobile surveillance
Frame rates:
H.264:
Up to 30 fps at 1920x1080
MPEG-4:
Up to 30 fps at 1920x1080
MJPEG:
Up to 30 fps at 1920x1080
Interface:
Audio/Video output
NTSC/PAL video output switch
Focus assist button
Image Settings
Adjustable image size, quality and bit rate
Time stamp and text caption overlay
Flip & mirror
Configurable brightness, contrast, saturation, sharpness, white balance and exposure
AGC, AWB, AES
WDR enhanced
Automatic, manual or scheduled day/night mode
BLC (Backlight Compensation)
Supports privacy masks
Audio
Compression:
GSM-AMR speech encoding, bit rate: 4.75 kbps to 12.2 kbps
MPEG-4 AAC audio encoding, bit rate: 16 kbps to 128 kbps
G.711 audio encoding, bit rate: 64 kbps, μ-Law or A-Law mode selectable
Interface:
Built-in microphone
External microphone input
Audio output
External/Internal microphone switch
Supports two-way audio
Supports audio mute
All specications are subject to change without notice. Copyright 2011 VIVOTEK INC. All rights reserved. P/N:
c
VIVOTEK FD8162 is an easy-to-use fixed dome network camera, featuring 2-Megapixel or 1080p Full HD resolution with superb
image quality up to 30 fps. As a true day/night camera, the FD8162 features a removable IR-cut filter, maintaining clear images
24 hours a day. With WDR enhancement, users can identify image details in extremely bright or dark environments. It is
especially suitable for monitoring wide open indoor environments such as building entrances, airports or applications requiring
accurate identification.
With high-performance H.264/MPEG-4/MJPEG compression technology, the FD8162 offers extra-smooth HD video quality. For
installers, properly adjusting the focus of a megapixel network camera can be difficult due to the image detail. To resolve this,
the FD8162 is equipped with a focus assist button to allow users to precisely adjust the camera focus. Furthermore, the unique
design of the one-step mount facilitates easy usage of the FD8162, offering more flexible, hassle-free installation and
maintenance.
Together with a PIR sensor for thermal detection, 802.3af compliant PoE, tamper detection, MicroSD/SDHC card for on-board
storage, video cropping and e-PTZ functionality, the FD8162 is indisputably the top choice for reliable and high performance
surveillance.
2MP • PIR • Focus Assist • One-step Mounting •
WDR Enhanced
Ø157 mm
110 mm
49 mm
61 mm
WDR
Enhanced
Full HD
Focus
Assist