Vivotek FD8361 Security Camera User Manual


 
VIVOTEK
136 - User's Manual
by commas)
audioout_codec <a list of the available
codec types separated
by commas)
0/7 Available codec list.
camctrl_httptunnel <boolean> 0/7 Indicate whether to support “http tunnel” of
PTZ control.
camctrl_httptunnelcl
ient
<boolean> 0/7 Indicate whether to support “http tunnel
client” of PTZ control.
camctrl_privilege <boolean> 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the Security
page.
uart_httptunnel <boolean> 0/7 Indicate whether to support HTTP tunnel for
UART transfer.
transmission_mode Tx,
Rx,
Both
0/7 Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
network_wire <boolean> 0/7 Indicate whether to support Ethernet.
network_wireless <boolean> 0/7 Indicate whether to support wireless.
wireless_s802dot11
b
<boolean> 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot11
g
<boolean> 0/7 Indicate whether to support wireless
802.11g.
wireless_beginchan
nel
1 ~ 14 0/7 Indicate the begin channel of wireless
network
wireless_endchanne
l
1 ~ 14 0/7 Indicate the end channel of wireless
network
wireless_encrypt_w
ep
<boolean> 0/7 Indicate whether to support wireless WEP.
wireless_encrypt_w
pa
<boolean> 0/7 Indicate whether to support wireless WPA.
wireless_encrypt_w
pa2
<boolean> 0/7 Indicate whether to support wireless WPA2.
derivative_brand <boolean> 0/7 Indicate whether to support the upgrade
function for the derivative brand. For
example, if the value is true, the VVTK
product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)
npreset <positive integer> 0/7 Number of preset locations.
eptz <positive integer> 0/7 A 32-bit integer, each bit can be set