Filter
Top Products
VIVOTEK
User's Manual - 5
Outer View
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin denitions are described below.
Record the MAC address
under the camera base before
installing the camera.
Network Camera
Model No: FD8361
Made in Taiwan
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Pat. 6,930,709
RoHS
V I
MAC:0002D1083236
CLASS A
IP66-rated Vandal-proof
Dome Cover
N.C.
N.C.
N.C.
AC24V
AC24V
Camera Base
a
b
c
Hole a~c:
Holes to secure the bottom base.
IP66-rated Vandal-proof
Bottom Base
N.C.
N.C.
N.C.
AC24V
AC24V
a
b
c
N.C.
N.C.
N.C.
AC24V
AC24V
GND
DI
DO
+12V
N.C.: No Connector
N.C.: No Connector
N.C.: No Connector
AC24V: Power in AC 24V
AC24V: Power in AC 24V
GND: Ground
DI : Digital Input
DO : Digital Output
+12V : Power, 12V DC
Pin Name Specification
N.C. No Connector
N.C. No Connector
N.C. No Connector
AC24V Power in AC 24V AC 24V ± 5%
AC24V Power in AC 24V AC 24V ± 5%
GND Ground
DI Digital Iutput OPEN/Short-to-GND, isolation 2kV
DO Digital Output Max. 40VDC, max. 400mA, isolation 2kV
+12V Power +12V 12VDC ± 10%, max. 0.4A