Filter
Top Products
VIVOTEK
62 - User's Manual
If you want to congure another sensor setting for day/night/schedule mode, please click Prole to open
the Sensor Settings Prole Settings page as shown below.
Please follow the steps beolw to setup a prole:
1. Check Enable this prole.
2. Select the applied mode: Day mode, Night mode, or schedule mode. Please manually enter a range of
time if you choose Schedule mode.
3. Configure Exposure settings in the second column. Please refer to the last page for detailed
information.
4. Click Save to enable the setting and click Close to exit the page.