Filter
Top Products
VIVOTEK
User's Manual - 9
Drop-ceiling mount (without the bottom base)
1. Attach the supplied ceiling hole template sticker to the ceiling.
2. Open a hole along the inner circle of the sticker.
3. Using the 3 circles on the sticker, drill 3 pilot holes into the ceiling. Then hammer the three
supplied plastic anchors into the holes.
4. Mount the Network Camera to the ceiling and feed the cables through.
5. Using the three holes on the side of the camera base, insert the three supplied screws into
the corresponding holes and secure them with a screwdriver.
NOTE
► The ground wire is directly connected and xed on the FD8361 housing as shown below.
1
5
2
3
4
Ceiling Hole Template Sticker
Drill hole
GND