Filter
Top Products
- 26 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Build a Security Application
The Administrator can combine
options on the application page to
perform many useful security
applications. There are two trigger
sources coming from attached
devices, such as for motion
detection. There are also two
kinds of actions responding to
such events, including uploading
snapshots over the Internet and
driving other attached devices. To
upload the snapshots, the User
can choose either email or FTP according to user’s needs. Both e-mail and FTP use the
network settings on the Mail & FTP page. Refer to the definition section for detail
configuration.
1. Click on “Configuration” on the
homepage,
2. Click on “Application” in the left column,
3. Check the weekdays as you need and
give the period of "Snapshots begin" time
and "Snapshots end" time to monitor the
triggering conditions every day,
4. Check the “Event operation”. The
triggering condition can be set to detected
motion or status of the attached device,
5. Set the delay before detecting next
event to avoid continuous false alarms
following the original event,