Filter
Top Products
- 34 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Build a Security Application
The Administrator can combine options
on the application page to perform
many useful security applications. There
are two trigger sources coming from
attached devices, such as for motion
detection. There are also two kinds of
actions responding to such events,
including uploading snapshots over the
Internet and driving other attached
devices. To upload the snapshots, the
User can choose either email or FTP
according to user’s needs. Both e-mail
and FTP use the network settings on the
Mail & FTP page. Refer to the definition section for detail configuration.
1. Click on “Configuration” on the
homepage,
2. Click on “Application” in the left
column,
3. Check the weekdays as you need and
give the period of "Snapshots begin"
time and "Snapshots end" time to
monitor the triggering conditions every
day,
4. Check the “Event operation”. The
triggering condition can be set to
detected motion or status of the
attached device, including every DI of
the eight inputs.
5. Set the delay before detecting next event to avoid continuous false alarms following