26
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Basic Operations (continued)
Relationship between the number of operational cameras and available “PPS” (pictures per second)
Number of operational
cameras
PPS
SHORT
Recording
interva
l
LONG
#1 / #2 #3 / #4
#5 / #6
#7 / #8
#9 / #10
#11 / #12
#13 / #14
#15 / #16
30P
15P
10P
7.5P
6P
5P
3P
2P
1P
0.5P
0.25P
0.125P
15P
7.5P
5P
3.75P
3P
2.5P
1.5P
1P
0.5P
0.25P
0.125P
0.063P
10P
5P
3.333P
2.5P
2P
1.667P
1P
0.667P
0.333P
0.167P
0.083P
0.042P
7.5P
3.75P
2.5P
1.875P
1.5P
1.25P
0.75P
0.5P
0.25P
0.125P
0.063P
0.031P
6P
3P
2P
1.5P
1.2P
1P
0.6P
0.4P
0.2P
0.1P
0.05P
0.025P
5P
2.5P
1.667P
1.25P
1P
0.833P
0.5P
0.333P
0.167P
0.083P
0.042P
0.021P
4.27P
2.135P
1.423P
1.068P
0.854P
0.712P
0.427P
0.285P
0.142P
0.071P
0.036P
0.018P
3.75P
1.875P
1.25P
0.938P
0.75P
0.625P
0.375P
0.25P
0.125P
0.063P
0.031P
0.016P
♦ Present time display
When the unit is turned on, the time/date display is dis-
played on the upper left corner of the screen (see below,
DISPLAY MODE 3).
For setting other display modes, see “DIS-
PLAY MODE” page 37.
During recording, the used HDD space is dis-
played. When recording is stopped, the display is
cleared (with the exception of pausing when record-
ing). The HDD usage display appears again after a
few moments when recording is started once more.
INFORMATION
This unit uses 4 digits to display the year. The
allowed display range is 99 years between 1/1/
2001 ~ 12/31/2099. The unit is also equipped with
a function to automatically calculate leap years.
The date returns to the year 2001 after 12/31/
2099.
♦ Recorded capacity display function
01 - 01 - 2003
WED
00 : 00 : 00 15P 99% A00001
Year
Month
Day
Day of
the week
Alarm recording number
Minute
Second
Hour
Playback interval
(single screen
playback only)
Recorded capacity of
the Hard Disk
This unit displays the used space of the specified record-
ing device (HDD) on the screen when “REMAIN HDD” of
the <REAR TERMINAL SETTINGS> screen is set to “MAIN
HDD”, “SUB HDD”. The “%” indicates the used space de-
tected against the total capacity. The following settings are
required to enable this function.
1) Select the device and set the remaining capacity using
“REMAIN HDD” of the <REAR TERMINAL SETTINGS>
screen ( see page 57).
2) Select “3” for “DISPLAY MODE” in the <TIME DATE/
DISPLAY SETTINGS> screen ( see page 37).
<TIME DATE ADJUST>
DAYLIGHT SAVING OFF
>>
MONTH 10
DAY 01
YEAR 2003
TIME 00:00:00
6. Turn the JOG dial clockwise to move the cursor (>>) to
“DAY”.
When turning the JOG dial clockwise, the cursor
(>>) moves down. When turning counterclockwise,
the cursor (>>) moves up.
7. Repeat steps 4 ~ 6 to set “DAY” and “YEAR”.
8. Turn the JOG dial to move the cursor (>>) to “TIME” and
turn the SHUTTLE ring clockwise twice.
• The “TIME” display reverses in color when the SHUTTLE
ring is turned the first time. When the ring is turned for the
second time, the display turns red and flashes.
<TIME DATE ADJUST>
DAYLIGHT SAVING OFF
MONTH 10
DAY 28
YEAR 2003
TIME 00:00:00
9. Turn the JOG dial to display “18” and turn the SHUTTLE
ring clockwise.
• The setting is confirmed and flashing stops.
<TIME DATE ADJUST>
DAYLIGHT SAVING OFF
MONTH 10
DAY 28
YEAR 2003
TIME 18:00:00
The time is indicated using the 24-hour system.
10. Repeat steps 8 and 9 to set “MINUTE” and “SECOND”.
11. Turn the SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
<TIME DATE ADJUST>
DAYLIGHT SAVING OFF
MONTH 10
DAY 28
YEAR 2003
TIME 18:30:00
12. Turn the SHUTTLE ring counterclockwise.
