Filter
Top Products
145
MVP MANUAL
5. MVP VIDEO OUTPUT MODES
¶ The video output formats set by the mode switches are as shown in the following table.
(At shipment, the mode switch value is set to “8”.)
¶ Bus format : NTSC .......................... NTSC digital signal transmission method.
¶ Output format : VBS (VIDEO signal), Can be switched between Y/C and RGB.
However, VBS and Y/C can only be used for the standard speeds.
¶ Sync signal frequency : Standard speed ......... Horizontal 15.734 kHz, vertical 59.94 Hz interlace
: Double speed............. Horizontal speed 31.469 kHz, vertical 59.94 Hz non-inter-
lace
¶ Dropout reduction function: Function for alleviating dropout due to the scanning line structure particular to
multi vision systems
NOTE:
With the RMD-V2550U, only standard speed input is possible. Double speed signals can not be displayed.
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
NTSC
NTSC
VBS, Y/C
RGB
VBS, Y/C
RGB
Standard speed
Double speed
Standard speed
Double speed
OFF
ON
Reserved
Reserved
Mode switch No. Bus format Output format Sync signal frequency
Dropout reduction function