Filter
Top Products
4
Chapter 4
Adjustments and settings for recording
43
Display item What is displayed Status when display appears
G Total length of
cassette tape
¢¢¢min
This indicates the total length of the cassette tape.
(This appears during a mode check.)
H Super iris ON/
super black ON
S
B
SB
This appears when S.IRIS has been set to ON.
This appears when S.BLK has been set to ON.
This appears when S.IRIS and S.BLK have been set to ON.
E Unit’s REC display
REC This appears when the extender unit has been connected to indicate the
unit’s recording status using characters. It lights during recording, and it
flashes while the unit’s mode is transferring to recording or when a
warning has been issued.
F Remaining tape ¢¢¢min
=
END
=
INH
Under normal conditions, “¢¢¢min” lights, and this starts flashing while
the tape is reaching the end.
When the tape has reached the end, “
=
END” lights.
When recording has been inhibited, “
=
INH” lights.
D Remaining battery
charge/voltage
¢¢.¢V
¢¢¢%
EMP
MAX
This indicates the remaining battery charge in 0.1V increments.
This indicates the remaining digital battery charge in percent.
This appears when the battery has no charge left.
This appears when the battery has a full charge.
C Battery type
AJ-BP490 to AC_ADPT This indicates the type of battery selected on the menu. “AC_ADPT”
appears when an AC adapter has been input.
A Interval, pre-rec
display
i (flashing)
iREC (lighting)
iREC (flashing) ¢¢h¢¢m/¢¢s
P-REC (flashing) ¢s
This appears in the INTERVAL REC mode during the times when the
operation of the REC button is not acknowledged before the start of or
at the end of recording.
This appears during an INTERVAL REC operation.
This appears during INTERVAL REC standby to indicate the wait time
until the next recording.
This indicates the amount of time remaining until the end of the set PRE
REC time during PRE REC operation.
B ID recording
display
ID This appears when the setting to superimpose the ID onto the camera
image and record the image with the ID has been established.
@ Zoom display
Z00 to Z99 This indicates the amount of zoom. Note that this item is not displayed
even if the display setting is ON if the lens is not equipped with a zoom
position return function.
? Iris, f-value
NC
OPEN
F1.7 to F16
CLOSE
This appears when the lens cable is not connected.
This appears when the lens aperture is open.
This indicates the aperture value (f-value) of the lens.
This appears when the lens aperture is closed.
<Note>
These displays appear when using a lens equipped with an aperture
value display function. They flash while the aperture is being changed
for the iris override.
> Iris override
display
++
+
(No display)
–
––
When the iris override function is working, this indicates how much
compensation is provided.
++: The aperture is opened by a full stop.
+: The aperture is opened by a half stop.
– –: The aperture is closed by a full stop.
–: The aperture is closed by a half stop.
No display: Reference status