Filter
Top Products
Chapter 4
Adjustments and settings for recording
52
READ?
YES
#
NO
Loading the data saved on the card
1
Perform the menu operations, and display the “CARD
READ/WRITE” screen.
If the data is given a title when it is saved, the title will
also be displayed.
3
Turn the JOG dial button to select any number from 1 to
8, and press the JOG dial button.
2
Turn the JOG dial button to move the arrow (cursor) to
the R.SELECT item and press the JOG dial button.
Selecting the file No
13
Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
When the data saving is completed, the following
message appears.
14
Press the MENU button to exit the menu operations.
The setting menu is cleared, and the displays showing
the unit’s current statuses appear at the top and bottom of
the viewfinder screen.
4
Turn the JOG dial button to move the arrow (cursor) to
the READ item.
Loading the data of the selected file
< CARD READ/WRITE >
R.SELECT :1
#
READ
W.SELECT :1
WRITE
CARD CONFIG
TITLE READ
TITLE:
1: ******** 5: ********
2: ******** 6: ********
3: ******** 7: ********
4: ******** 8: ********
< CARD READ/WRITE >
#
R.SELECT 1
READ
W.SELECT 1
WRITE
CARD CONFIG
TITLE READ
TITLE:
1: ******** 5: ********
2: ******** 6: ********
3: ******** 7: ********
4: ******** 8: ********
5
When the JOG dial button is pressed, the following
message appears.
WRITE OK
6
Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
When the data loading is completed, the following
message appears.
READ OK