Filter
Top Products
30
b) Push the joystick up/down to select “USB Mode”.
c) Push the joystick right for 2 options: “Mass storage”; “PC
camera”.
f) Push the joystick up/down to select “mass storage” or
“PC camera” and then press down on the joystick to confirm.
g) You can also press the mode button to switch the USB mode
between “Mass storage” and “PC camera” quickly when the
camera is connected to the PC with an USB cable.
K. Firmware version
a) Power on and press the menu button to enter “Setup”;
b) Push the joystick up/down to select “Firmware version”;
c) Push the joystick right to display the firmware version and
update date.
d) Press down on the joystick to exit.