Filter
Top Products
NetCamera NV
APPENDIX A: Frequently Asked Questions
A.1 Using LEDs to Diagnose Problems
The LEDs are useful aides for finding possible problem causes.
A.1.1 LED Power
The PWR LED on the front panel does not light up.
Steps CORRECTIVE ACTION
1
Make sure that the NetCamera NV’s power adaptor is
connected to the Access Point and plugged in to an
appropriate power source. Use only the supplied power
adaptor.
2
Check that the NetCamera NV and the power source are both
turned on and the NetCamera NV is receiving sufficient power.
3
If the error persists, you may have a hardware problem. In this
case, you should contact Atlantis Land SpA.
A.1.2 LED LAN
The LAN LED on the front panel does not light up.
Steps CORRECTIVE ACTION
1
Check the Ethernet cable connections between the
NetCamera NV and the computer or hub.
2
Check for faulty Ethernet cables.
3
Make sure your computer’s Ethernet card is working properly.
4
If these steps fail to correct the problem, contact Atlantis Land
SpA for assistance.