Filter
Top Products
47
AXIS 241Q/241S - System Options
Resetting to the Factory Default Settings
To reset the AXIS 241Q/241S to the original default settings, go to the System Options >
Maintenance web page (described in
Maintenance, on page 45) or use the control button
on the AXIS 241Q/241S, as described below:
Using the Control Button
Follow the instructions below to reset the AXIS 241Q/241S to the factory default settings
using the Control Button.
1. Switch off the AXIS
241Q/241S by disconnecting
power.
2. Press and hold the Control
button while reconnecting the
power.
3. Keep the Control button
pressed until the Status
Indicator displays yellow (this
may take up to 15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (may take up to 1 minute), the
process is complete and the AXIS 241Q/241S has been reset.
6. Re-install the AXIS 241Q/241S, as described elsewhere in this manual.
Control Button
Status Indicator