Filter
Top Products
43
AXIS 225FD - System Options
Network - SMTP (email)
Enter the host names or addresses for your primary and secondary mail servers in the fields
provided, to enable the sending of event and error email messages from the camera to
predefined addresses via SMTP.
Network - SNMP
The Simple Network Management Protocol (SNMP) allows the remote management of
network devices. Select the version of SNMP to use, depending on the level of security
required. HTTPS should be enabled when setting the password for SNMPv3.
Network - UPnP™
The camera includes support for UPnP™, which is enabled by default. If also enabled on
your computer, the camera will automatically be detected and a new icon will be added to
“My Network Places.”
Note:
UPnP must also be enabled on your Windows XP or ME computer. To do this, open the Control Panel from
the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open
the Networking Services section. Click Details and then select UPnP as the service to add.
Network - RTP (Multicast)/MPEG-4
These settings are the IP address, port number, and Time-To-Live value to use for the video
stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers should
be used for multicast streams. For more information, please see the online help.
Network - Bonjour
The AXIS 225FD includes support for Bonjour. When enabled, the camera is automatically
detected by operating systems and clients that support Bonjour.
Ports & Devices
I/O Ports
The two alarm inputs and one output on the AXIS 225FD can be connected to various
external devices, e.g. door sensors and alarm bells. The name given to the ports can be
changed and state of the I/O ports can be set to Open circuit or Closed circuit.
The pinout, interface support and the control and monitoring functions p
rovided by this
connector are described in Unit Connectors,
on page 47.
COM Port RS485/422
The RS-485/422 port can also be configured to allow it to be controlled by TCP/IP
applications. The TCP/IP parameters are described in the online help.